Auto Provision
Auto Provision helps you to set up your IP phones in bulk.
Using auto provision, you can instruct phone to retrieve its configuration . Once you provision your phones , the phones will automatically configure themselves correctly. In this way, you can manage your phones centrally without having to configure your phones one by one.
Note: Telephone must be in the same Intranet environment as PBX to realize “automatic configuration”; in VLAN or VPN environment, “automatic configuration” cannot take effect.
UC-Series IPPBX supports PnP feature provision method:
-
Plug the phones into the same network with the PBX.
-
Make sure that the phone’s PnP feature is enabled.
-
Configure the phones on the Auto Provision page.
-
Click Save and reboot the phones.
-
The phones will send a multicast message across the network when boots up.
-
The PBX will send a provisioning URL to the phones.
-
The phones download configuration file from the URL, resolve and apply the settings.