Add an Outbound Route

To allow users to make outbound calls through trunks, you need to set up at least one outbound route on the PBX.

The PBX has a default outbound route with dial pattern X. that allows users to dial any outgoing numbers. You can delete the default outbound route, then add a new one to configure settings according to your needs.

1. Go to PBX > Call Control > Outbound Routes, click Add.

2. On the configuration page, configure an outbound route according to your needs.

   • Route Name: Enter a name to help you identify it.

   • Route CID: Use it to override extension CID.

   • Route Password: Optional. Set a password for the outbound route. If a password is set, users are required to enter a password when they try to make outbound calls through this route.

   • Dial patterns wizards: select the dial rule in the drop-down list, these options provide a quick way to add outbound dialing rules.

   • Selected Trunks: Select trunks to make outbound calls in the Add Trunks option. If the dialed number matches a dial pattern of the outbound route, PBX will route the call out through selected trunk.

3. Click Save and Apply.