Navigation: Configuration > Feature Guide > Voice Service > Audio Paging >
Emergency call content can be broadcast to paging group members in real time.
Prerequisites
The configurations of unicast or multicast are complete.
Procedure
1.Use an administrator account to log in to the web management system of a X1900 series unified gateway.
2.On the audio paging group management page, click Member in the Operation column for the audio paging group to configure.
3.Click Create.
4.Associate the emergency call prefix with the audio paging group, as shown in Figure 1. Click OK.
Figure 1 Associating the emergency call prefix with the audio paging group
Table 1 describes key parameters for associating the emergency call prefix with the audio paging group.
Table 1 Key parameter description
Parameter |
Description |
Member type |
Indicates the type of an audio paging group member. Select Prefix from the drop-down list box. |
Emergency call prefix |
Indicates an emergency call prefix that is set. For more information about emergency calls, see Emergency Call. |
5.In the upper right corner of the web page, click 
to save the configuration.
Parent Topic: Audio Paging