Navigation: Configuration >
This topic describes how to configure the basic information, numbers, trunks, and some services for the unified gateway.
ϒ⁄The configuration process described in this topic is a complete and general process. It provides guidance for initial configuration, configuration verification, and commissioning of the unified gateway.
ϒ⁄Before configuration, check the prerequisites for configuration and learn about how to log in to the configuration tool.
ϒ⁄Configuring the Basic Information
ϒ⁄This topic describes how to configure the working mode, network port mode of the main control board, IP address, system time of the unified gateway.
ϒ⁄This topic describes how to configure boards in the web management system based on the actual hardware configuration. After the boards are configured, you can perform operations such as number allocation and trunk configuration.
ϒ⁄This topic describes how to allocate user numbers of different types based on the network configuration. The unified gateway supports two types of users: SIP user and POTS user.
ϒ⁄This topic describes how to configure various trunk data to connect the unified gateway to the peer device.
ϒ⁄Configuring Toll Fraud Prevention
ϒ⁄You can configure limiting conditions on the PBX to prevent extra expenses due to call fraud.
ϒ⁄This topic describes the background and application scenario of the call detail record (CDR) service and explains the methods of configuring and verifying the CDR service in the EC solution.
ϒ⁄This topic describes common configuration policies and services including number change, intelligent routing, and call restriction.
ϒ⁄Post-Configuration Operations(Data save)
ϒ⁄This topic describes the enterprise user information, server IP addresses, backup files, documents, and maintenance suggestions to be provided for the enterprise customer after the configurations are completed.
Parent Topic: Configuration