Navigation: Operation and Maintenance > Administrator Guide > Routine Operations >
This topic describes how to configure call rights on unified gateway.
Background
unified gateway classifies a user's incoming and outgoing call rights into the following types:
ϒ⁄Inter: intra-office call
ϒ⁄Local: local call
ϒ⁄DDD: national toll call
ϒ⁄IDD: international toll call
unified gateway also supports 32 customized call rights.
The 32 customized call rights can be used to control a user's call rights, for example, to prohibit calls with specified users.
Procedure
ϒ⁄Enabling the service
1.Log in to the web management system. For details, see Login Web Management System.
2.Choose User > SIP User.
To enable the service for POTS users (not applicable for X1980), choose User > POTS User.
3.Find the number for which the service is to be enabled.
4.Select the number and click Service Configuration.
The service configuration page is displayed.
5.In the Complex service area, click Configure next to Outgoing call right.
6.In the Configure Outgoing Call Right dialog box that is displayed, select user rights as required, as shown in Figure 1.
Figure 1 Configuring user rights
7.Click OK.
The message "Configuration success" is displayed.
ϒ⁄Disabling the service
1.Perform operations in enabling the service from 1 to 5.
2.In the Configure Outgoing Call Right dialog box, deselect user rights as required.
3.Click OK.
The message "Configuration success" is displayed.
Parent Topic: Routine Operations