Navigation: Configuration > Feature Guide > Voice Service > Privileged User >
This following describes the procedure for configuring the privileged user service for user 8000:
1.Log in to a X1900 series unified gateway using the CLI and access the Config mode.
2.Set the user as an attendant and activate the privileged user service for the user.
config modify subscriber dn 8000 usertype operator operatenewservice add newservicerights superrightsuser
Parameter |
How to Set |
dn |
Enter the user number for which the service is to be activated. |
usertype |
Set this parameter to Operator. |
operatenewservice |
ϒ⁄To activate the service, set this parameter to Add. ϒ⁄To deactivate the service, set this parameter to Del. |
newservicerights |
Set this parameter to SuperRightsUser. |
3.Run the save command to save the configuration.
Parent Topic: Privileged User