<< Click to Display Table of Contents >> Navigation: Configuration > Configuration Examples in Typical Scenarios > Multi-Node Network Scenario (Convergent) > Configuring Local Nodes |
Navigation: Configuration > Configuration Examples in Typical Scenarios > Multi-Node Network Scenario (Convergent) >
At each local node, configure office routes, prefixes, and SIP trunks to the convergent node based on the data plan to implement interconnection between the local nodes.
This topic uses local node 1 as an example. Configure the other local nodes based on the data plan and by referring to the configuration procedure for local node 1.
ϒ⁄You have completed the data plan for node interconnection. For the detailed data plan, see Scenario.
ϒ⁄You have verified the following functions for each local node in a single-node network:
§Intra-office basic voice calling (placing calls to each other using short numbers or "area code+short numbers").
§Connection to the carrier network.
In the current scenario, at local node 1, configure office route selection code 1 to the convergent node.
1.Choose Trunk > Office Route Configuration > Office Route Selection Code.
2.Click Create.
3.Configure office route selection code 1 and click OK.
In the current scenario, at local node 1, configure office route 1 to the convergent node.
1.Choose Trunk > Office Route Configuration > Office Route.
2.Click Create.
3.Configure office route 1 and click OK.
In the current scenario, at local node 1, configure prefixes 021, 025, and 0571 to the convergent node, with their call attribute being local call and office route selection code being 1.
1.Choose Trunk > Called Prefix Configuration.
2.Click Create.
3.Configure a prefix (for example, 021) and click OK.
4.Repeat steps 2 and 3 to configure other prefixes.
In the current scenario, at local node 1, configure the SIP trunk to the convergent node.
1.Choose Trunk > Trunk Configuration > SIP.
2.Click Add A Peer Office.
The connection between the local office and the peer office is displayed.
3.Click the line between Local and point:0.
4.Configure a SIP trunk and click OK.
5.Click Data Save in the upper right corner of the web management system portal.
Configure the interconnection data at the other local nodes.
Parent Topic: Multi-Node Network Scenario (Convergent)