Navigation: Configuration > Configuration Guide (Web Mode) > Configuring the Basic Information >
Configure the IP address of the unified gateway to ensure interoperability with other devices in the network.
Repair external communication IP address
The factory default external communication IP address for X1911/X1960/X1981 is 10.241.241.241:8080, and the default gateway is 10.241.241.1. Please make modifications based on your actual data planning.
This section takes the implementation of the following requirements as an example: modify the local communication IP address of the unified gateway to 172.16.228.61, the subnet mask to 255.255.0.0, and the gateway address to 172.16.0.1.
1.Log in to the web management system. Please refer to Logging in to the web management system for instructions on how to log in.
2.Select "System Management>Device Management" in the navigation bar.
3.Click on 'Configure' after 'IP Address'.
4.Modify the local IP and gateway addresses, as shown in Figure 1.
Figure 1 Modifying the Local IP
5.Click 'Save'.
The system pops up a prompt window saying 'Please complete the address modification for P, if the master has already used TLS certificate, please regenerate the certificate'. Then, please log in to the Unified Gateway with the modified IP address.
6. If you want to enable TLS, please go to the certificate management page to regenerate the TLS certificate.
Parent Topic: Preparing Configuration Tools