Navigation: Configuration > Feature Guide > Voice Service > Multi-Number >
1.Log in to a X1900 series unified gateway using the CLI and access the Config mode.
2.Configure the primary and secondary numbers.
config add otmn primarydn primarydn standbydn standbydn
Parameter |
Description |
primarydn |
Indicates the primary number. The value must be an intra-office number that has been allocated; otherwise, the command fails to be executed. |
standbydn |
Indicates the secondary number. The value must be an intra-office number that has not been allocated; however, the number prefix must exist. For example, if you add 5000 as a secondary number, intra-office number 5000 does not need to exist, but there must be intra-office prefix 5, 50, 500, or 5000. |
ϒ⁄To delete a secondary number, run the config delete otmn primarydn primarydn standbydn standbydn command.
ϒ⁄To deactivate the service, run the config delete otmn primarydn primarydn command.
3.Run the save command to save the configuration.
Parent Topic: Multi-Number