Navigation: Configuration > Feature Guide > Voice Service > Calling Line Identification Restriction >
Configuring CLIR Rights
1.Use an administrator account to log in to the web management system of the X1900 series unified gateway.
2.On the User > SIP User or User > POTS User page, select the user number to be assigned the service permission and click Service Configuration.
3.Under Simple service, select the CLIR service to activate and click OK.
4.In the upper right corner of the web page, click 
to save the configuration.
Configuring the Calling Number Display Prefix
1.Use an administrator account to log in to the web management system of the X1900 series unified gateway.
2.Choose Trunk > Called Prefix Configuration and click Create. On the Create Prefix page that is displayed, configure prefix ##.
ϒ⁄Prefix: ##
ϒ⁄Service type: Supplementary service
ϒ⁄Call property: Display calling number
ϒ⁄Use default values of other parameters.
3.In the upper right corner of the web page, click 
to save the configuration.
Enabling Software Parameter 496
config softargu type 496 value 1 (default value: 0)
ϒ⁄When software parameter 496 is set to 1, the CLIR feature takes effect for outgoing calls, but not intra-office calls.
ϒ⁄When software parameter 496 is set to 0, the CLIR feature takes effect for intra-office calls, but not outgoing calls.
Parent Topic: Calling Line Identification Restriction