Zaptel For BRI

Estimated reading: 5 minutes 378 views

Q1, You can not compile zaptel/mISDN and asterisk

please make sure that:
1) You have installed all necessary packages and kernel source.
2) Make sure the version of kernel source is exactly same with the version of the kernel.
please check the few links:
http://www.openvox.cn/download/user_manuals_english_version/
http://www.asteriskguru.com/tutorials/
3) make sure that you do not miss any packages or files in asterisk or zaptel.
4) make sure your system can access www.asterisk.org.

Q2, ZT_SPANCONFIG failed on span 1: Invalid argument (22)

if you are using bristuff with bri cards, please check:
1) run lspci -vvvvv, make sure the system can detect the card. Tiger jet chip will be found. If there is no such Tiger jet chip, please clean the PCI slot and try again.
2) if lspc can find the card, make sure the pci id is included in the PCI table in our driver. how to patch the picid, please refer this link:
http://www.openvox.cn/kb/entry/2/
3) if step 1 and step 2 are ok, please check the zaptel.conf or system.conf to make sure that the setting is correct.
4) if step 3 is correct, please make sure that there is no mISDN tiger jet module in the system, if it is there, please remove that or add to blacklist.
5) if you still can not boot it up, you have to recompile bristuff and asterisk again.

Q3, zaphfc: dropped audio (z1=2331, z2=2314, wanted 8 got 17, dropped 9)

you can have a try to set please add apm=off in your grub.conf

Q4, issues with wcb4xxp

this is a link with dahdi wcb4xxp, you many refer these links:
https://issues.asterisk.org/view.php?id=14834
https://issues.asterisk.org/view.php?id=14031
http://docs.tzafrir.org.il/dahdi-linux/README.html
https://bugs.digium.com/view.php?id=14031
https://bugs.digium.com/view.php?id=13897

Q5,FATAL: Module qozap.ko cannot be found

if this problem occurred, please make sure:
1) the module is compiled and installed properly
2) you entered a right kernel, which you used to compile the zaptel
3) make sure you have a access permission to load the module.
4) make sure the qozap.ko is under /lib/modules/2.6.XX/extra

Q6,FATAL: Module zaphfc.ko not found

Q10, Compile error on CentOS-4.6 with Kernel-2.6.9-67.0.15.ELsmp and CONFIG_DAHDI_NET

please refer this link:
https://issues.asterisk.org/view.php?id=13427

Q11, dahdi_compat.h:31:27: error: zaptel/zaptel.h: No such file

please read this:
https://issues.asterisk.org/view.php?id=14121

Q12, when compiling zaptel/bristuff, error: You do not appear to have the sources for…

please refer these links:
http://forums.digium.com/viewtopic.php?t=7061
http://lists.digium.com/pipermail/asterisk-users/2007-June/189259.html

Q13, Bug#439814: zaptel-source: oslec_echo_can_identify undefined symbol

please refer this:
http://lists.alioth.debian.org/pipermail/pkg-voip-maintainers/2007-August/009225.html

Q14, Bug in Zaptel 1.2.20.1 and 1.4.5.1 – Only MG2

please refer this:
http://trixbox.org/node/21080 http://www.rowetel.com/ucasterisk/oslec.html

Q15, Tonezones for zaptel.conf

The file zonedata.c contains the information about the tone zones used in libtonezone (and hence also in ztcfg). Here is a list of those zones:

us United States / North America

au Australia

fr France

nl Netherlands

uk United Kingdom

fi Finland

es Spain

jp Japan

no Norway

at Austria

nz New Zealand

it Italy

us-old United States Circa 1950 / North America

gr Greece

tw Taiwan

cl Chile

se Sweden

be Belgium

sg Singapore

il Israel

br Brazil

hu Hungary

lt Lithuania

pl Poland

za South Africa

pt Portugal

ee Estonia

mx Mexico

in India

de Germany

ch Switzerland

dk Denmark

cz Czech Republic

cn China

ar Argentina

my Malaysia

th Thailand

bg Bulgaria

ve Venezuela

ph Philippines

ru Russian Federation

tr Turkey

Q16, Where get i get zaptel?

Now you can get two versions about zaptel from our website:
http://www.openvox.cn/pub/drivers/zaptel/release/openvox_zaptel-1.2.27.tar.gz

http://www.openvox.cn/pub/drivers/zaptel/release/openvox_zaptel-1.4.12.1.tar.gz