Analog Gateway FXO connect with Freepbx15
This document mainly describes the detailed steps of connecting the analog gateway with Freepbx.
Follow the steps below to configure two-way calls between the phone and the gateway:
Outgoing call: from Freepbx SIP extension 3002 to the gateway through relay 1008;
Incoming call: call from an outside line to the gateway, through SIP trunk 1008 to Freepbx, and then send the call to the 3002 SIP extension through Freepbx;
In the following steps, the parameters below are mandatory configurations, and other parameters can be configured according to your needs.
Step1. Create a SIP Trunk in Freepbx Server
Please login your Freepbx server to create a SIP trunk(1008) .In Freepbx server web, please choose “Connectivity—>Trunks—>Add SIP (chan_sip)Trunk” to set like that:
Step 2. Create a sip extension named 3002
Create a sip extension named 3002 in webpage “Applications—->Extensions”.
Step 3. Configure Routings in Freepbx
Outbound routing rules：
Inbound routing rules:
|Set destination||Extensions 3002|
Step 4. Set Network Parameters in Web
Log in to the network in the browser, and click “Network -> LAN Settings” to set your network parameters. The figure below is an example for reference only.
Step 5. Create a SIP Endpoint in Web
Please select “VOIP—>SIP Endpoints—>Add ” to set SIP trunk. The following figure shows detail information about how to set it.
|hostname or IP Address||you need to enter your PBX IP. 172.16.2.51|
|port||The default port of SIP in FreePBX is 5160|
About other parameters in SIP, please set by your requirements for there is no need to set them in simple calls.
Step 6. Set Routing Rules in Web
Click “ROUTING—> Call Routing Rules—> New Call Routing Rule” to set outbound and inbound routing rules like the following:
Inbound routing rules:
Outbound routing rules:
Please save all your changes to make effect.
Step 7. Register a SIP extension by software
Taking advantage of SIP software such as Xlite, eyeBeam to register a SIP extension(3002).
Incoming call test: Dial the number of port 1 on the gateway via your mobile to see if 3002 will ring. If 3002 rings, it means your configuration is successful; unless, it means there is something wrong with your configuration, please check it.
Outgoing call test: Dial your mobile number on 3002 extension registered in a software phone. If your mobile rings, it means your configuration is ok; unless, please check your configuration.
Leave a Comment