The UCP1600 chassis provides a centralized and interconnected space for internal components while preventing component contamination and protecting them from external causes of damage.
Appearance
The UCP1600 adopts 1U standard chassis, 434mm wide, 330mm deep and 44mm high. The chassis can be installed in an IEC (International Electrotechnical Commission) compliant 19-inch cabinet, and its appearance is shown in Figure 1.
Figure 1 Chassis appearance
Slot
The slots are located on the front side of the chassis, and the UCP1600 provides one main control board slot and four module board slots.
•Slot 2 to 5 are module board slots for installing various module boards and support mixed plugging.
•Slot 1 is the main control board slot for installing CCU-N-GML or CCU-N-BAYL main control board.
•If the main control board wants to expand the hard disk board, you can insert the hard disk board into slot 2 and use it together.
The slot distribution is shown in Figure 2.
Figure 2 Chassis slot distribution
2 |
3 |
5 |
|---|---|---|
1 |
CSU-F/G |
4 |
Description:
•The UCP1600 module board can be optional depending on the system capacity. Empty slots for unconfigured interface boards, need to install empty panels
•To ensure proper use of the basic functions, the UCP1600 can only be equipped with 1 main control board.
•The M4 grounding screw is not required if the equipment is mounted to the cabinet using lug screws; the M4 grounding screw is required if the chassis is mounted on a pallet without lug screws for grounding.
•The module board will identify the initial IP address according to the slot number, for example, slot 2: 172.16.80.2
Parent topic: UCP1600/2120/4131 Product Structure