Navigation: Plan and Design >
This document is intended to guide deployment engineers to perform various tasks such as installation and configuration during deployment of the unified communications product, and provide typical cases related to the deployment. First, you need to know the deployment process.
Figure 1 describes tasks in the deployment process, reference documents needed for each task, and outputs of deployment engineers in each phase, to give you an overall picture of the deployment.
Plan and configure the service data by strictly following the information described in Configuring Toll Fraud Prevention. Otherwise, toll fraud (placing international toll calls or premium-rate telephone numbers bypassing the security policies) may occur, causing economic losses.
Figure 1 Deployment process
Methods of obtaining the reference documents in the preceding figure are shown in Table 1.
Table 1 Reference documents for deployment and methods of obtaining reference documents
Document |
Methods of Obtaining |
Quick Installation Guide |
ϒ⁄A paper quick installation guide is delivered with the product. ϒ⁄Obtain the document from the CD-ROM that is delivered with the product. |
Acceptance Test Guide |
Visit Enterprise Service Support and login. enter UScale X19XX in the search box, select the path displayed below the search box, and click Search. On the Documentation tab page, download your Product Documentations. |
The Installation and Configuration of the terminal and network management software |
ϒ⁄Released with the software product. ϒ⁄The reference documents released with this document. |
Other documents mentioned in the preceding figure |
Other documents mentioned in the preceding figure are the documents of Engineering Proposal for OpenVox United Communications Solution. Connect the OpenVox technical support to obtain them. |
Parent Topic: Plan and Design