Navigation: Configuration > Configuration Examples in Typical Scenarios > Traditional PBX Interworking Scenario >
This topic describes how to configure boards in the web management system based on the actual hardware configuration. After the boards are configured, you can perform operations such as number allocation and trunk configuration.
Procedure
1.Log in to the unified gateway web management system.
2.Choose System > Board Configuration.
3.Click the slots and select boards from the displayed drop-down list box.
The board type that you select must be the same as that in the slot on the unified gateway.
4.Click OK.
5.Click Data Save in the upper right corner of the web management system.
The unsaved configurations will be deleted after the device is restarted.
Parent Topic: Traditional PBX Interworking Scenario