Auto Provision VOIP Parameters
1.1 voip_set
api analog voip_set {“sip_anonymous”:”no”,”in_ringtime”:65,”out_ringtime”:65,”user_agent”:”OIAD”,”timer_t1″:500,”timers”:”yes”,”timers_min_se”:90,”timers_sess_expires”:1800,”cadence”:[“2000,4000″,”2000,4000″,”2000,4000″,”2000,4000″,”2000,4000″,”2000,4000″,”2000,4000″,”2000,4000″,”2000,4000″,”2000,4000″],”sip_cid2″:0,”calltimeout”:43200000,”net_failover”:”yes”}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| user_agent | string | OIAD | user-agent string in SIP protocol Length: 1-64 | 230522 |
| timer_t1 | int | 500 | Transmission time T1 value Format: (milliseconds) 100-10000000 | 230308 |
| timer_t2 | int | 4000 | Transfer time T2 value Format: (milliseconds) 800-10000000 | 231024 |
| allow_tx_hash_in_uri | string | no | Do not escape the “#” sign Format: yes (yes) no (no) | 231020 |
| timers | string | yes | Session Timer (RFC4028) support method Format: yes/no/always/required | 230308 |
| timers_min_se | int | 90 | Session Refresh Minimum Interval Format: (milliseconds) 90-10000000 | 230308 |
| timers_sess_expires | int | 1800 | Session Refresh Maximum Interval (must be greater than or equal to the minimum value) Format: (milliseconds) 90-10000000 | 230308 |
| in_ringtime | int | 55 | (dialplan) Inbound wait timeout Optional: 10-1000 unit s | 230308 |
| out_ringtime | int | 55 | (dialplan) Outgoing call wait timeout optional: 10-1000 unit s | 230308 |
| sip_cid2 | int | 0 | (dialplan) Calling number display priority: 0 (FROM), 1 (P-Asserted-Identity) | 230308 |
| calltimeout | int | 43200000 | Call Maximum Limit Format: 0-9999999999 Unit ms 0 means unlimited | 230308 |
1.2 fxs_set
api analog_port fxs_set {“slotnum”:0,”channel”:1,”sip_listen_port”:30000,”enable”:”yes”,”fxs_tpl”:”iadfxs”,”callwaiting”:”yes”,”threewaycalling”:”yes”,”transfer”:”yes”,”canpark”:”yes”,”callerid_name”:”777″,”port_profile”:0,”sip_tpl”:”iadfxs”,”callerid_num”:”777″,”from_user”:””,”auth_username”:”777″,”auth_password”:”777″,”register”:”no”,”sip_server_profile”:0,”voip_profile”:0,”send_pai”:”no”,”send_rpid”:”no”,”user_eq_phone”:”no”,”hotline_num”:””,”hotline_delaytime”:1,”dnd”:0,”digitmap_profile”:0,”ucf”:””,”bcf”:””,”nacf”:””,”send_pani”:”no”,”send_pei”:”no”}
| KEY | VAL | Default | Remark | renew |
|---|---|---|---|---|
| slotnum | int | – | Slot number Format: not null, note the restriction, invalid error report | |
| channel | int | – | Slot number Format: not null, note the restriction, invalid error report | |
| enable | string | no | Enable port Format: yes/no | |
| callwaiting | string | yes | (FXS) Call waiting support is switched via hook-flash Format: yes/no | |
| threewaycalling | string | yes | (FXS) 3-way call/talk support (need to enable transfer) Format: yes/no Note: Setting to no will send a fork event to the sip server. |
230420 |
| transfer | string | yes | (FXS) Call forwarding support (need to enable threewaycalling, auto override canpark) Format: yes/no | |
| canpark | string | yes | (FXS) Allow resident support (affected by transfer) Format: yes/no | |
| callerid_name | string | empty | (FXS) Display name Format: forbidden ‘”<> Fill in, 32-bit length, can be empty | 221209 |
| cidformat | int | 3 | (FXS)Configuring Caller ID Format: 1 CID Only,2 Display Name Only,3 Display Name and CID | 231115 |
| port_profile | int | 0 | (FXS) Binding PORT policy Format: policy number, non-nullable | |
| callerid_num | string | empty | (FXS/SIP) Account name Format: 32-bit length Note: If empty, register is forced to no. |
230515 |
| from_user | string | empty | (SIP) FROM mandatory account Format: 32-bit length, null (not mandatory) | 220723 |
| auth_username | string | empty | (SIP) Authentication account Format: 64-bit length, null Note: If empty use callerid_num instead |
230515 |
| auth_password | string | empty | (SIP) Authentication password Format: 64-bit length, empty | 220723 |
| register | string | yes | (SIP) Enable registration Format: yes/no | |
| sip_server_profile | int | 0 | (SIP) Binding Service Policy Format: policy number, not empty | |
| voip_profile | int | 0 | (SIP) Bind VOIP policy Format: policy number, non-nullable | |
| send_pai | string | no | (SIP) Add P-Asserted-Identity header when INVITE Format: yes/no | 230523 |
| send_rpid | string | no | (SIP) Add Remote Party ID header when INVITE Format: yes/no | 230523 |
| user_eq_phone | string | no | (SIP) Add user=phone header when INVITE Format: yes/no | 230523 |
| hotline_num | string | empty | (AGI Dynamic) Hotline number Format: (0-9a-zA-Z+-#*), empty (closed) Length up to 32 digits | |
| hotline_delaytime | int | 1 | (AGI Dynamic) Hotline Delay Wait Format: 0-1000 Unit s | |
| dnd | int | 0 | (AGI Dynamic) Enable Do Not Disturb Format: 0 (Off) 1 (On) Note: The stutter tone heard when the phone is off the hook indicates that Do Not Disturb is in operation. |
230509 |
| digitmap_profile | int | 0 | (AGI Dynamics) Bind Number Map Policy Format: policy number, not null, note restriction, invalid report error | 220729 |
| ucf | string | empty | (AGI Dynamic) Unconditional Calling Number Format: length 0-16 digits Null means off | 230510 |
| bcf | string | empty | (AGI Dynamic) Busy Call Forwarding Number Format: Length 0-16 digits Null means off. | 230510 |
| nacf | string | empty | (AGI Dynamic) No Answer Call Forwarding Number Format: length 0-16 bits Null means off | 230510 |
| send_pani | string | no | (AGI dynamic) Add P-Access-Network-Info header when INVITE Format: yes/no | 230523 |
| send_pei | string | no | (AGI dynamic) Add P-Emergency-Info header when INVITE Format: yes/no | 230523 |
1.3 profile sip_server
api analog_profile sip_server_set {“name”:”sip_server”,”media_encryption”:”no”,”media_encryption_optimistic”:”no”,”registration_expiration”:3600,”registration_retry_interval”:30,”registration_max_retries”:10,”auth_realm”:”*”,”aor_qualify_frequency”:0,”aor_qualify_timeout”:60,”aor_authenticate_qualify”:”no”,”sip_port_mode”:”udp”,”primary_ipaddr”:””,”primary_sip_port”:5060,”second_ipaddr”:””,”second_sip_port”:5060,”from_domain”:””,”external_boundle”:”wan”,”dns_mode”:””,”outbound_proxy”:””,”ice_support”:”no”,”method”:””,”tls_uri”:0,”tls_pem”:-1,”tls_calist”:-1,”verify_server”:”no”,”require_client_cert”:”no”,”profile”:0}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| profile | int | – | Policy number Format: not null, note the limit, invalid error | 230508 |
| name | string | empty | Policy name Format: 32 characters, nullable | 230508 |
| media_encryptionstring | string | no | (RTP) Media Enable SRTP Format: sdes, no | 230508 |
| media_encryption_optimistic | string | no | (RTP) Media force SRTP Format: yes/no (auto) | 230508 |
| registration_expiration | int | 3600 | (SIP) Registration expiration time Format: 10-10000 units of s | 230508 |
| registration_retry_interval | int | 30 | (SIP) registration_retry_interval Format: 0-10000 units of s | 230508 |
| registration_max_retries | int | 10 | (SIP) Registration retries format: 0-10000 | 230508 |
| auth_realm | string | * | (SIP) Authentication domain Format: *(counterpart prevails), other, length 1-64 | 230508 |
| aor_qualify_frequency | int | 0 | (SIP) signaling send heartbeat time Format: 0-10000 units of s | 220723 |
| aor_qualify_timeout | int | 60 | (SIP) Signaling heartbeat timeout interval Format: 1-10000 units of s | 220723 |
| aor_authenticate_qualify | string | no | (SIP) qualify authentication Format: yes/no | 220730 |
| sip_port_mode | string | udp | (SIP) Signaling port type Format: udp/tcp/tls | 230508 |
| primary_ipaddr | string | empty | (SIP) Primary server address Format: (domain name and IP address standard) 63 characters, nullable Note: If primary_ipaddr is empty, no SIP configuration is issued. |
230508 |
| primary_sip_port | int | 5060 | (SIP) Primary server signaling port Format: 100-65535 | 230508 |
| second_ipaddr | string | empty | (SIP) Primary server signaling port Format: 100-65535 | 230508 |
| second_sip_port | int | 5060 | (SIP) Standby server signaling port Format: 100-65535 | 230508 |
| from_domain | string | empty | (SIP) Field to use the specified URI as the From Header Length: 0-64 | 230508 |
| external_boundle | string | wan | (SIP) Service Binding Interface (basic, logical, virtual) Format: wan lan vpn1 alias1 alias2 Note: This parameter is not valid for hardware in combined mode. |
230508 |
| outbound_proxy | string | empty | (SIP) Outgoing proxy server Format: (address):(port) address is the address or domain name port is the port length 0-63 null means none |
230508 |
| dns_mode | string | empty | (SIP) DNS mode Format: null (automatically recognizes A Record or IP) srv (dnssrv mode) | 230508 |
| ice_support | string | no | (SIP) Enable STUN for this server Format: yes/no Remarks: You need to configure the STUN address and enable this parameter to make it effective. |
230508 |
| method | string | empty | (SIP) TLS version Format: empty (tlsv1) tlsv1 tlsv1_1 tlsv1_2 sslv2 sslv3 ssv23 | 230508 |
| tls_uri | int | 0 | (SIP) URI pattern for TLS Format: 0 (SIP) 1 (SIPS) | 230508 |
| tls_pem | int | -1 | (SIP) Device certificate PEM selection for TLS Format: -1 (none) 0 (default) 1 2 3 4 | 230508 |
| tls_calist | int | -1 | (SIP) CA certificate chain selection for TLS Format: -1 (off) 0 (enabled) | 230508 |
| verify_server | string | no | (SIP) UAC behavior for TLS verifies the validity of the peer’s certificate Format: yes/no | 230508 |
| require_client_cert | string | no | (SIP) UAS behavior for TLS verifies the validity of the counterpart’s certificate Format: yes/no | 230508 |
1.4 profile vip_set
api analog_profile voip_set {“name”:”voip”,”allow_transfer”:”yes”,”sip_udptl”:”yes”,”sip_udptl_ec”:”redundancy”,”dtmf_mode”:”rfc4733″,”use_ptime”:”no”,”allow”:”ulaw,alaw,g729″,”rtp_keepalive”:0,”rtp_timeout”:0,”rtp_timeout_hold”:0,”profile”:0}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| profile | int | – | Strategy number Format: not null, note the limitation, invalid error report | |
| name | string | empty | Strategy name Format: 32 characters, nullable | |
| allow_transfer | string | yes | (SIP) Allow REFER Format: yes/no | |
| sip_udptl | string | yes | (SIP) Enable UDPTL Format: yes/no | 220722 |
| sip_udptl_ec | string | redundancy | (SIP) UDPTL error correction Format: none/fec/redundancy | 220722 |
| dtmf_mode | string | rfc4733 | (RTP) DTMF mode Format: rfc4733 (improves rfc2833), inband (in-band audio), info (signaling send), auto (prioritizes rfc4733 over inband), auto_info (prioritizes rfc4733 over info) | |
| use_ptime | string | no | (RTP) Length of time to pack using the requested encoding Format: yes/no | |
| allow | string | ulaw,alaw,g729,g722 | (RTP) encoding priority format: 1. Multiple choice comma-separated sequential ordering 2. Default model: ulaw, alaw, g729, g722 3. Packing length model: ulaw:(10/20/30/40/50/60), alaw:(10/20/30/40/50/60), g729:(10/20/30/40/50/60), g722:(10/20/30/40) |
220820 |
| rtp_keepalive | int | 0 | (RTP) Media Revival Transmission Interval Format: 0-10000 units s | |
| rtp_timeout | int | 0 | (RTP) Inactive hang time in OFF HOLD Format: 0-10000 Unit s | |
| rtp_timeout_hold | int | 0 | (RTP) Inactive hang time in ON HOLD Format: 0-10000 Unit s |
1.5 port set
api analog_profile port_set {“name”:”port”,”echocancel”:”128″,”answeronpolarityswitch”:”no”,”hanguponpolarityswitch”:”no”,”rxgain”:”-2.5″,”txgain”:”0.0″,”sendcalleridafter”:1,”mwi_enable”:”no”,”mwitype_number”:”fsk”,”mwitype_led”:”no”,”profile”:0}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| profile | int | – | Strategy number Format: not null, note the limitation, invalid error report | |
| name | string | empty | Strategy name Format: 32 characters, nullable | |
| echocancel | string | 128 | (ALL) echo cancellation length (unit ms), front-end implementation, it is recommended to provide only open and close options, no on behalf of the close, read non-no on behalf of the open, (cli is can be set to: 16, 32, 64, 128, no), write open pass 128 | 231013 |
| answeronpolarityswitch | string | no | (ALL) Answer Reverse Pole (FXO receive/FXS generate) Optional: yes/no | |
| hanguponpolarityswitch | string | no | (ALL) Pendant Reverse Pole (FXO Receive/FXS Generate) Optional: yes/no | |
| rxgain | string | -2.5 | (ALL) Receiving Energy Gain Format: -12.0 to 12.0 in dB | 230426 |
| txgain | string | 0.0 | (ALL) Sending Energy Gain Format: -12.0 to 12.0 in dB | |
| sendcalleridafter | int | 1 | (FXS) Send Calling Number Method Selectable: 0(before ringing),1(after first tone),2,3 | |
| mwi_enable | string | no | (FXS) Enable MWI subscription and local number display Optional: yes/no Note: If callerid_num is not set, it is equivalent to no. |
230518 |
| mwitype_number | string | fsk | (FXS) Local number display method Optional: fsk (FSK display) nofsk (off) rpas (FSK sends pulse before display) | 230518 |
| mwitype_led | string | no | (FXS) MWI Illuminated Message Light Method Optional: no (off) lrev (polarity reversal) hvdc (90V hookup DC) hvac (90V hookup AC) |
1.6 digitmap_set
api analog_profile digitmap_set {“name”:”digitmap”,”priority”:0,”match_fail”:0,”sharp_asdial”:1,”rules”:[{“rule”:”x.”}],”key_sayip”:”*02″,”key_saychid”:”*97″,”key_sayexten”:”*98″,”enable_key_dnd”:0,”key_dnd_on”:”*78″,”key_dnd_off”:”*79″,”enable_key_ucf”:0,”key_ucf_on”:”*72″,”key_ucf_off”:”*73″,”enable_key_bcf”:0,”key_bcf_on”:”*90″,”key_bcf_off”:”*91″,”enable_key_nacf”:0,”key_nacf_on”:”*92″,”key_nacf_off”:”*93″,”profile”:0}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| profile | int | – | Strategy number Format: not null, note the limitation, invalid error report | 220726 |
| name | string | empty | Strategy name Format: 32 characters, nullable | 220726 |
| priority | int | 0 | Digit map model Format: 0 local priority 1 remote digit map (remote mode hotkey disabled) | 220726 |
| match_fail | int | 0 | Incomplete match send number Format: 0 off 1 on | |
| sharp_asdial | int | 1 | # key as send Format: 0 No 1 Yes | 221216 |
| rules | array | – | (Chart rules) Format: [{RSKV}…], refer to “RSKV”, empty array means empty. Reference to “RSKV”, empty array means empty. Quantity limit sys_info/oem’s maxdigitmaprule |
221216 |
| key_sayip | string | *02 | (SYSKEY) broadcast IP address Format: asterisk + XX Length 3 digits | 230509 |
| key_saychid | string | *97 | (SYSKEY) Announcement of channel number Format: asterisk + XX Length 3 digits | 230509 |
| key_sayexten | string | *98 | (SYSKEY) Announcement number Format: asterisk + XX Length 3 digits | 230509 |
| enable_key_dnd | int | 0 | (CALLKEY) Do not disturb function Format: 0 (enable) 1 (disable) | 230509 |
| key_dnd_on | string | *78 | (CALLKEY) Do Not Disturb Enable Format: asterisk + XX Length 3 digits | 230509 |
| key_dnd_off | string | *79 | (CALLKEY) Do not disturb close Format: asterisk + XX Length 3 digits | 230509 |
| enable_key_ucf | int | 0 | (CALLKEY) Unconditional call forwarding function Format: 0 (enable) 1 (disable) | 230510 |
| key_ucf_on | string | *72 | (CALLKEY) Unconditional call forwarding on Format: (asterisk + XX) Length 3 digits Dialing format: hotkey + number (no more than 16 digits) + well number (e.g. sharp_asdial on) |
230510 |
| key_ucf_off | string | *73 | (CALLKEY) Unconditional call forward close Format: asterisk + XX Length 3 digits | 230510 |
| enable_key_bcf | int | 0 | (CALLKEY) Busy call forwarding function Format: 0 (enable) 1 (disable) | 230510 |
| key_bcf_on | string | *90 | (CALLKEY) busy call forwarding on Format: asterisk + XX length 3 digits Dialing format: hotkey + number (no more than 16 digits) + well number (e.g. sharp_asdial on) |
230510 |
| key_bcf_off | string | *91 | (CALLKEY) Busy Call Forward Close Format: Asterisk + XX Length 3 digits | 230510 |
| enable_key_nacf | int | 0 | (CALLKEY) No-answer call forwarding function Format: 0 (enable) 1 (disable) | 230510 |
| key_nacf_on | string | *92 | (CALLKEY) No Answer Call Forwarding On Format: asterisk + XX Length 3 digits Dialing format: hotkey + number (no more than 16 digits) + well number (e.g. sharp_asdial on) |
230510 |
| key_nacf_off | string | *93 | (CALLKEY) No Answer Call Forward Close Format: asterisk + XX Length 3 digits | 230510 |
| RSKV | VAL | Default | Remark |
|---|---|---|---|
| rule | string | – | Routing rules Format: length 1-33 1.”.” Can only appear once and only at the end 2. “#” can only be at the beginning or the end 3. “*” is not restricted 4.”[]” cannot be empty[] 5. only X-X,Digit,*,#* are allowed in “[]”. |
1.7 callroute set
api analog_profile callroute_set {“name”:”callroute”,”match_fail”:0,”ip2tel”:[],”tel2ip”:[],”profile”:0}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| profile | int | – | Strategy number Format: not null, note the limitation, invalid error report | 221207 |
| name | string | empty | Strategy name Format: 32 characters, nullable | 221207 |
| match_fail | int | 0 | (AGI static) Match Failure Handling Format: 1 direct failure 0 direct call | 221207 |
| ip2tel | array | – | (AGI static) IP to port Format: [{I2TKV}…], refer to “I2TKV”. Reference to “I2TKV”, empty array means empty. Priority order, quantity limit sys_info/oem maxcallrouterule |
221207 |
| tel2ip | array | – | (AGI static) Port to IP Format: [{T2IKV}…], refer to “T2IKV”. …], refer to “T2IKV”, empty array means empty. Priority order, quantity limit sys_info/oem maxcallrouterule |
221207 |
| I2TKV | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| src | string | empty | Call source device Format: null (ignore)/other (content), length 0-33 | 221215 |
| match_callerprefix | string | empty | Calling prefix match Format: empty (ignore)/any (any)/other (content), length 0-33 | |
| match_calleeprefix | string | empty | Called prefix match Format: null (ignore)/any (any)/other (content), length 0-33 | |
| target | int | 0 | Routing Action Format: 0 deny 1 permit | |
| replace_callerdel_prefix | int | 0 | Calling Prefix deletion Format: 0-128 | |
| replace_callerdel_suffix | int | 0 | Caller Suffix deletion Format: 0-128 | |
| replace_calleradd_prefix | string | empty | Calling Prefix added Format: null (ignore)/other (content), length 0-33 | |
| replace_calleradd_suffix | string | empty | Caller Suffix added Format: null (ignore)/other (content), length 0-33 | |
| replace_calleedel_prefix | int | 0 | Called Prefix deletion Format: 0-64 | |
| replace_calleedel_suffix | int | 0 | Called Suffix deletion Format: 0-64 | |
| replace_calleeadd_prefix | string | empty | Called Prefix added Format: null (ignore)/other (content), length 0-33 | |
| replace_calleeadd_suffix | string | empty | Called Suffix added Format: null (ignore)/other (content), length 0-33 | |
| dest | string | empty | Call destination device Format: null (auto)/port number/port grouping number, length 0-33 Note: can be set arbitrarily or get number by querying analog_port/port_get |
| T2IKV | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| src | string | empty | Call source device Format: null (ignore)/other (content), length 0-33 | 221215 |
| match_callerprefix | string | empty | Calling prefix match Format: empty (ignore)/any (any)/other (content), length 0-33 | 221215 |
| match_calleeprefix | string | empty | Called prefix match Format: null (ignore)/any (any)/other (content), length 0-33 | 221215 |
| target | int | 0 | Routing Action Format: 0 deny 1 permit | 221215 |
| replace_callerdel_prefix | int | 0 | Calling Prefix deletion Format: 0-128 | 221215 |
| replace_callerdel_suffix | int | 0 | Caller Suffix deletion Format: 0-128 | 221215 |
| replace_calleradd_prefix | string | empty | Calling Prefix added Format: null (ignore)/other (content), length 0-33 | 221215 |
| replace_calleradd_suffix | string | empty | Caller Suffix added Format: null (ignore)/other (content), length 0-33 | 221215 |
| replace_calleedel_prefix | int | 0 | Called Prefix deletion Format: 0-64 | 221215 |
| replace_calleedel_suffix | int | 0 | Called Suffix deletion Format: 0-64 | 221215 |
| replace_calleeadd_prefix | string | empty | Called Prefix added Format: null (ignore)/other (content), length 0-33 | 221215 |
| replace_calleeadd_suffix | string | empty | Called Suffix added Format: null (ignore)/other (content), length 0-33 | 221215 |
| dest | string | empty | Call destination device Format: null (auto)/port number/port grouping number, length 0-33 Note: can be set arbitrarily or get number by querying analog_port/port_get |
1.8 option fax_set
api general_option fax_set {“t38_modem”:”v17,v27,v29″,”t38_maxrate”:”14400″,”t38_minrate”:”7200″,”t38_ecm”:”no”,”t38_negotiate_both”:”no”,”t38_detect_timeout”:0}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| t38_modem | string | v17,v27,v29 | Modem type Format: v17/v27/v29, comma-separated multi-selectable | 221001 |
| t38_maxrate | string | 14400 | Maximum rate Format: 14400/9600/7200/4800/2400 When the maximum rate is smaller than the minimum rate, the minimum rate is automatically forced to be used as the maximum rate. |
221001 |
| t38_minrate | string | 7200 | Minimum rate Format: 14400/9600/7200/4800/2400 | 221001 |
| t38_ecm | string | no | Turn on error checking Format: yes/no | 221001 |
| t38_negotiate_both | string | no | Enable automatic two-way negotiation Format: yes/no | 221001 |
| t38_detect_timeout | int | 0 | Detect Fax Tone Gateway Mode Duration Format: 0-1000 in s |
1.8 option qos set
api general_option qos_set {“tos_audio”:0,”tos_signal”:0}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| tos_audio | int | 0 | RTP Audio TOS Value Format: 0-255 | 220915 |
| tos_signal | int | 0 | SIP signaling TOS value Format: 0-255 | 220915 |
1.9 option voip set
api general_option voip_set {“sip_mode”:0,”sip_start”:30000,”sip_unregister_mode”:0,”rtp_start”:10000,”stunaddr”:””,”icesupport”:”no”}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| sip_mode | int | 0 | FXS listening mode for SIP Format: 0 (continuous multi-port) 1 (single port, valid for FXS only) | 230310 |
| sip_start | int | 30000 | SIP start port Format: 1000-65000 | 221115 |
| sip_unregister_mode | int | 0 | (SIP) SIP logout on device reboot Format: 0 (off) 1 (on) | 230420 |
| rtp_start | int | 10000 | RTP start port Format: 1000-65000 Note: Need to be spaced with SIP to avoid overlap, it is recommended that the interval is more than 1W. |
221115 |
| icesupport | string | no | Enable STUN for RTP Format: yes/no Note: You need to configure STUN in sip for it to take effect. |
230504 |
| stunaddr | string | empty | STUN address for RTP Format: length 0-63 characters [addr]:[port] Remarks: empty is off, port defaults to 3478 |
230503 |
1.10 option cdr set
api general_option cdr_set {“cdr_enable”:”no”,”cdr_filter”:”ANSWERED”,”cdr_limit”:100,”action”:0}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| cdr_enable | string | no | Enable CDR recording Format: yes/no | 230317 |
| cdr_filter | string | ANSWERED | Filtered data Format: empty (no filtering) “NO ANSWER” (no quotes) FAILED BUSY ANSWERED CONGESTION UNKNOWN | 230317 |
| cdr_limit | int | 100 | Limit on number of saves Format: range 100-5000 Note: Small devices try not to exceed 1000 or they may crash (500KB) 5000 entries (2MB) |
230317 |
| action | int | 0 | Action execution format: 0 no action, 1 clear CDR data | 230317 |
1.11 ocloudclient set
api sys_ocloudclient set {“disabled”:1,”server_addr”:”mycloud.server”,”server_port”:7000}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| disabled | int | 0 | Switch Format: 0 (on), 1 (off) | 230531 |
| server_addr | string | openvox.cloud | Server address Support ip and domain name, length 1~100 | 230531 |
| server_port | int | 7000 | Open ports must be allowed by the firewall, server port Format: The default port value is 7000, and the range of values is 1 to 65535. | 230531 |
1.12 ocloudclient bind_set
api sys_ocloudclient bind_set {“bind_code”:””}
| KEY | VAL | Default | Remark | Renew |
|---|---|---|---|---|
| bind_code | string | bind code | 230531 |